Fix-on 1 bracket pads (pack of 2), for use with our steel & fbre frames.
What you are buying!
The Fix-On 1 Bracket Pads (Pack of 2) are used to secure the roof bracer hooks of your awning without the drilling of any holes or having any permanent fixture to your caravan. The rubber pad of the bracket lays flat against the side of your caravan and acts as a buffer once tension is applied to the roof bracer.
The Fix-On 1 Bracket is slid onto the secondary piping/beading of the awning itself. The secondary piping/beading is sewn next to the main piping/beading that slides into awning rail of your caravan.
Once you have the Fix-On 1 Bracket in position, push the small grey button on the bracket to lock in place.
Please note you will require one Fix-On 1 Bracket for every roof bracer of your awning frame.
NB. It is advised that the Fixing Brackets are slid onto the piping/beading after the roof section of the awning has been slid into the awning rail and again removed first, before pulling the roof section out of the awning rail. This advice is given to prevent any 'drag' marks that may occur otherwise or the snagging on the awning lights of some caravans.